The Agilent / HP ENA-L RF Network Analyzer is a general purpose analyzer that provides reliable basic S-parameter measurements with easy-to-use features and solid performance based on the latest in modern technologies.
Features and Specifications of:
●Features:
oEasy to use features
oIntegrated T/R or S-parameter test set
oBuilt-in Visual Basic® for Applications (VBA)
●Specifications:
oFrequency: 300 kHz to 1.5 GHz
oImpedance: 50 or 75 Ω test port
oDynamic range: 120 dB
oTrace noise: 0.005 dB rms
oIF bandwidth settings:
■Range: 10 Hz to 30 kHz
■Nominal settings are: 10, 30, 100, 300, 1 k, 3 k, 30 k
oRF connectors:
■Typ-N, female
■50 Ω or 75 Ω
oExternal trigger connector:
■Type: BNC, female
■Input Level:
■Low threshold voltage: 0.5 V
■High threshold voltage: 2.1 V
■Input level range: 0 to +5 V
■Pulse width: ≥ 2 μsec
■Polarity: Negative (downward) only
oExternal reference signal input connector:
■Type: BNC, female
■Input frequency: 10 MHz ± 10 ppm
■Input level: 0 dBm ±3 dB
oInternal reference signal output connector:
■Type: BNC, female
■Output frequency: 10 MHz ± 10 ppm
■Signal type: Sine wave
■Output level: 0 dBm ±3 dB into 50 Ω
■Output impedance: 50 Ω
oVGA video output:
■15-pin mini D-Sub, female
■Drives VGA compatible monitors
oGPIB:
■24-pin D-Sub (type D-24), female
■Compatible with IEEE-488
oParallel port:
■36-pin D-Sub (type 1284-C), female
■Provides connection to printers, or multiport test set
oUSB port:
■Universal serial bus jack, type A configuration (4 contacts inline, contact 1 on left), female
■Provides connection to printers, ECal module, USB/GPIB interface
■Contact 1: Vcc: 4.75 to 5.25 VDC, 500 mA, maximum
■Contact 2: -Data
■Contact 3: +Data
■Contact 4: Ground
oLAN:
■10/100 BaseT Ethernet, 8-pin configuration
■Auto selects between the two data rates
oHandler I/O port:
■36-pin Centronics, female
■Provides connection to handler system
oLine power (a third-wire ground is required):
■Frequency: 47 Hz to 63 Hz
■Voltage: 90 to 132 VAC, or 198 to 264 VAC (automatically switched)
■VA maximum: 350 VA maximum
