The Keysight 6680A (Agilent) Power Supply has exceptional, proven and reliable DC power for manufacturing test and long-term burn-in. It also has the features needed for easy test system integration. Very low ripple and noise help its built- measurement system make extremely accurate current and voltage measurements.

Features and Specifications of:

Features:

●Low output ripple and noise

●Selectable compensation for inductive loads

●Analog control of output voltage and current

●Built-in printer for quick test report generation and total prevention of data loss

●Fan-speed control to minimize acoustic noise

●Built-in measurements and advanced programmable features

●Protection features to ensure DUT safety

Specifications:

●Number of outputs:  1

●GPIB:  Yes

●Output ratings:

oVoltage:  0 to 5 V 

oCurrent:

■(40°C then derate linearly 1%/°C from 40°C to 55°C)

■0 to 875 A

●Programming accuracy at 25°C ± 5ºC:

oVoltage:  0.04% + 5 mV 

oCurrent:  0.1% + 450 mA 

●Ripple and noise constant voltage mode from 20 Hz to 20 MHz:

oVoltage:

■rms:  1.5 mV 

■peak-to-peak:  10 mV 

●Readback accuracy at 25°C ± 5° (percent of reading plus fixed): 

oVoltage: 0.05% + 7.5 mV

oCurrent:  0.1% + 600 mA

●Load and line regulation:

oVoltage: 0.002% + 0.19 mV

oCurrent:  0.005% + 65 mA

●Ripple and noise constant current mode from 20 Hz to 20 MHz:

oCurrent rms:  290 mA

●Transient response time:  < 900 μs for the output voltage to recover to within 150 mV following a change in load from 100% to 50% or 50% to 100% of the output current rating of the supply

●Average programming resolution:

oVoltage: 1.35 mV

oCurrent:  235 mA

oOVP: 30 mV

●Output voltage rogramming response time (excluding command processing time):  9 ms 

●Output common-mode noise current (to signal-ground binding post):  

orms:  1.5 mA 

opeak-to-peak:  10 mA