Product Overview
ROHDE & SCHWARZ FSP40
The Rohde & Schwarz FSP40 Spectrum Analyzer is a wide band, very sensitive receiver. It works on the principle of “super-heterodyne receiver” to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Rohde & Schwarz, Inc. FSP40. The CRT displays received signal strength (y-axis) against frequency (x-axis).
Key specifications of the Rohde & Schwarz FSP40 Spectrum Analyzer include:
●Frequency range 9 kHz to 3GHz, 7 GHz, 13 GHz, 30 GHz and 40 GHz
●Resolution bandwidth 1 Hz to 10 MHz
●Displayed average noise level -155 dBm (1 Hz)
●Phase noise -113 dB (1 Hz) at 10 kHz
●Additional filters:
oChannel filters from 100 Hz to 5 MHz and RRC filters
oFFT filters from 1Hz to 30 kHz
oEMI bandwidths and quasi-peak detector
oMeasurement functions for TOI, MC ACP(R), OBW, CCDF, APD, etc
oMeasurement applications for cellular standards and general purpose, e.g. phase noise, noise figure, etc.
Features of the R&S FSP40 Spectrum Analyzer include:
●Full choice of detectors
oMax, Min-, Auto-Peak, Sample, RMS, Average, Quasi-Peak
●CP/ACP/Fast ACP measurement functions with a host of predefined standards
●Multi Carrier ACP measurement with independent inter carrier spacing support
●ACP/MCAP with up to 12 adjacent channels and max hold power function
●Automatic test routines for measuring TOI, OBW, phase noise, and ACP®, AM modulation depth
●Harmonic distortion measurement
●CCDF & APD function (y-unit % possible)
●Editable limit lines including PASS/FAIL indication
RBW-characteristics:
●Digital filters from 10 Hz to 100 kHz (1,3,10 steps)
●Analog filters from 300 kHz to 10 MHz (1,3,10 steps)
●39 channel filters 100 Hz to 5 MHz
●RRC filters (IS-136, TETRA, WCDMA)
●EMI bandwidth standard
●FFT filters 1 Hz to 30 kHz
●10 dB step attenuator (5 dB with FSP-B25)
●Electronic attenuator and preamplifier option
●IF power trigger with sensitivity down to – 50 dBm mixer level
●Gated trigger function
●Full choice of marker functionality
oPhase noise, noise, n dB down / n dB up , Peak list, frequency counter (0.1 Hz in 30ms)
●Internal tracking generator with power sweep support
●External generator control (reverse sweep)
●Extension of frequency range with external mixers with BIAS tuning support whilst trace display is active
●HP 859x/8566/8591E/71100C/71200C/71209C compatible GPIB command set
●FSEx/FSIQ compatible GPIB command set
●List mode for extremely fast GPIB operation
●Ethernet interface (100 Base T)
●21 cm color SVGA TFT Display
●Split screen mode
●Operating system: Embedded Windows XP
oEasy documentation of measurements
oRemote desktop functionality
oCompatibility (printer drivers, network, etc.)
●Interfaces: GPIB, RS-232-C, LAN (option), USB
●VXI-11 remote support
●Wide range of available application firmware including code domain power measurements for 3 GPP communication standards
oBluetooth
oGSM/EDGE
o3 GPP WCDMA, HSDPA, TD-SCDMA
oCDMA2000, 1xEV-DV, 1xEV-DO
oWLAN 802.11a (restricted OFDM spectrum)
oNoise figure and gain measurements
oFM/PM/AM measurement demodulator
oPhase noise measurement
oPower sensor measurement supporting the power sensors R&S NRP-Z11, Z21, Z22, Z23, Z24, Z51, Z55, Z81, Z91, the external power meters R&S NRVD, HP EPM, HP 437B, HP438A and power splitter
